E-clip 1.2 mm
DIN 6799 E-clip 1.2 mm - Carbon Spring Steel
£4.95
Pack of 10 · No VAT charged
Available to order
Sold by the pack of 10. No VAT charged on any order.
- Standard
- DIN 6799
- Type
- E-clips
- Nominal size
- 1.2 mm shaft groove
- Measured on
- shaft groove
Need a size that is not listed? Ask the trade desk.
Technical specification
| Standard | DIN 6799 |
|---|---|
| Type | E-clips |
| Nominal size | 1.2 mm shaft groove |
| Measured on | shaft groove |
| Material | Carbon spring steel |
| Pack quantity | 10 pieces |
| Axial SKU | AX-6799-12-CS-10 |
| Availability | Available to order |
About this part
Carbon spring steel E-clip for a 1.2 mm shaft groove, manufactured to DIN 6799. Designed for radial fitting where axial access is limited.
Check the specification before ordering
Retaining rings are dimension-critical. Confirm the groove diameter, groove width and ring thickness against the applicable standard for your application. Safety-critical assemblies need independent engineering verification.
Before you order
- How to measure for a circlip — measure the shaft, not the old ring
- DIN 6799 explained — what the nominal size refers to
- Fitting and removing circlips — pliers, seating and safety
Photographs show a representative part from the DIN 6799 range. Dimensions are governed by the standard, not by the photograph.
Nearby sizes
Same family and standard, adjacent nominal sizes.