Internal circlip 22 mm
DIN 472 Internal circlip 22 mm - Carbon Spring Steel
£7.90
Pack of 10 · No VAT charged
In stock
Sold by the pack of 10. No VAT charged on any order.
- Standard
- DIN 472
- Type
- Internal circlips
- Nominal size
- 22 mm bore
- Measured on
- bore
Need a size that is not listed? Ask the trade desk.
Technical specification
| Standard | DIN 472 |
|---|---|
| Type | Internal circlips |
| Nominal size | 22 mm bore |
| Measured on | bore |
| Material | Carbon spring steel |
| Pack quantity | 10 pieces |
| Axial SKU | AX-472-22-CS-10 |
| Availability | In stock |
About this part
Carbon spring steel internal circlip for a 22 mm housing bore, manufactured to DIN 472. Intended for axial retention in a machined bore groove.
Check the specification before ordering
Retaining rings are dimension-critical. Confirm the groove diameter, groove width and ring thickness against the applicable standard for your application. Safety-critical assemblies need independent engineering verification.
Before you order
- How to measure for a circlip — measure the bore, not the old ring
- DIN 472 explained — what the nominal size refers to
- Fitting and removing circlips — pliers, seating and safety
Photographs show a representative part from the DIN 472 range. Dimensions are governed by the standard, not by the photograph.
Nearby sizes
Same family and standard, adjacent nominal sizes.