External circlip 10 mm
DIN 471 External circlip 10 mm - Carbon Spring Steel
£4.40
Pack of 10 · No VAT charged
In stock
Sold by the pack of 10. No VAT charged on any order.
- Standard
- DIN 471
- Type
- External circlips
- Nominal size
- 10 mm shaft
- Measured on
- shaft
Need a size that is not listed? Ask the trade desk.
Technical specification
| Standard | DIN 471 |
|---|---|
| Type | External circlips |
| Nominal size | 10 mm shaft |
| Measured on | shaft |
| Material | Carbon spring steel |
| Pack quantity | 10 pieces |
| Axial SKU | AX-471-10-CS-10 |
| Availability | In stock |
About this part
Carbon spring steel external circlip for a 10 mm shaft, manufactured to DIN 471. Intended for axial retention in a machined shaft groove.
Check the specification before ordering
Retaining rings are dimension-critical. Confirm the groove diameter, groove width and ring thickness against the applicable standard for your application. Safety-critical assemblies need independent engineering verification.
Before you order
- How to measure for a circlip — measure the shaft, not the old ring
- DIN 471 explained — what the nominal size refers to
- Fitting and removing circlips — pliers, seating and safety
Photographs show a representative part from the DIN 471 range. Dimensions are governed by the standard, not by the photograph.
Nearby sizes
Same family and standard, adjacent nominal sizes.